When I was working with my contractor father, every job, big or small, would inevitably start the same way. “You might as well go get the toolbox. Otherwise we’ll spend all our time running back and forth for tools.”
Within a few months of Matt and I moving into our first house, my Dad gifted me with a toolbox of my own.
Like most DIYers, our tools are in a variety of places, and we endeavour to have hammers, wrenches, tape measures and whatever else we might need wherever we might need them. However, no matter where we’re working and how I try to spread tools around, we usually end up needing the toolbox as well.
(I might think a screwdriver and a pair of pliers will be sufficient, but the universe usually laughs at my overconfidence.)
After Sarah in Illinois got a glimpse of my toolbox in a post a few weeks ago, I thought I should share it here. It’s an indispensable part of my DIY life.
The idea of this toolbox is not to hold every single one of our tools. The idea is to hold the basic tools needed for most jobs. Limiting the number means that the toolbox stays relatively light, so I can easily carry it to wherever I’m working. (When I once complained that the box was too heavy, my Dad’s helpful response was, “You’ve got too much in it, honey. You don’t need all that stuff.”)
There’s a main area that holds the bulk of the tools. (And yes, there are two hammers here, because Matt and I each have our own.)
My Dad added a partition on the one side that makes a spot for blades–a couple of utility knives and a large and small hacksaw.
On one end, a “pocket” holds a chisel, pencils, crayons and earplugs. How many times have you found yourself pencil-less in the middle of a job? Just me?
And finally a bar on one side of the box holds screwdrivers. This bar is one of my favourite features. It keeps the screwdrivers out of the jumble of the rest of the tools in the bottom of the box and makes it easy to find the one I need.
I like that this toolbox is open. I don’t have to deal with latches or trays. I can simply reach in and grab what I need. Plus, if I know I’m going to need more wrenches or sockets or another tool that doesn’t normally live in the toolbox, I can easily toss in the case, and carry it to the worksite.
Here’s what I have in my basic toolbox:
- Tape measure
- Speed square
- Pliers (regular, needle-nosed, side cutters, adjustable)
- Adjustable wrench
- Electrical tape
- Stubby screwdrivers (slotted, Robertson red and green, Phillips)
- Screwdrivers (Robertson, Phillips and slotted in various sizes–12 in total)
- Trowels (medium and small)
- Hacksaws (large and small with spare blades)
- Utility knives (two with spare blades)
If you’re interested in a building a toolbox like this for yourself, I’ve sketched a plan that you can download. Since this is built using scrap wood, adjust it for what best meets your needs.
How do you store your tools? Anyone else have a DIY toolbox? What are your indispensable tools?